Basement

Posted by barnoid Wed, 22 Jul 2009 23:31:39 GMT

Basement
MakeCanon
ModelCanon EOS 300D DIGITAL
Exposure0.2 sec (1/5)
Aperturef/3.5
ISO Speed800
Date and Time (Original)2009:07:18 15:20:24
Exposure Bias-2 EV
FlashNo Flash
Focal Length18 mm
QualityFine
Metering ModeEvaluative
Lens TypeUnknown (-1)

Komodo 3 - more recently

Posted by barnoid Thu, 03 May 2007 23:28:00 GMT

Komodo 3 - more recently
A more recent photo though there have been several changes to the fans since this one. The SCSI has been replaced with SATA.
MakeCanon
ModelCanon EOS 300D DIGITAL
Exposure0.017 sec (1/60)
Aperturef/4
ISO Speed200
Date and Time (Original)2007:04:04 20:12:42
Exposure Bias0/3 EV
Metering ModePattern
FlashFlash fired
Focal Length27 mm

Komodo 3 - LEDs

Posted by barnoid Thu, 03 May 2007 23:28:34 GMT

Komodo 3 - LEDs
A demonstration of the lightshow.
MakeCanon
ModelCanon EOS 300D DIGITAL
Exposure5 sec (5)
Aperturef/3.5
ISO Speed400
Date and Time (Original)2006:01:31 18:21:14
Exposure Bias0/3 EV
Metering ModePattern
Focal Length18 mm

Komodo 3 - inverter circuit

Posted by barnoid Thu, 03 May 2007 23:28:41 GMT

Komodo 3 - inverter circuit
The led on the motherboard’s built-in network interface is normally on and blinks off on activity, I want it the other way round. This is a simple transistor inverter circuit which controls the front mounted LED. Unfortunately the LED resistor is too small and so the LED is much too bright.
MakeCanon
ModelCanon EOS 300D DIGITAL
Exposure0.017 sec (1/60)
Aperturef/8
ISO Speed400
Date and Time (Original)2006:01:26 18:22:46
Exposure Bias-2 EV
Metering ModePattern
FlashFlash fired
Focal Length55 mm

Komodo 3 - case finished

Posted by barnoid Thu, 03 May 2007 23:28:53 GMT

Komodo 3 - case finished
Mesh on and holes cut for switches. They were tricky.
MakeCanon
ModelCanon EOS 300D DIGITAL
Exposure0.2 sec (1/5)
Aperturef/5.6
ISO Speed400
Date and Time (Original)2006:01:24 23:46:54
Exposure Bias0/3 EV
Metering ModePattern
Focal Length45 mm

Komodo 3 - mesh going on

Posted by barnoid Thu, 03 May 2007 23:29:05 GMT

Komodo 3 - mesh going on
Fan and switch panel in place. The mesh is about to go on. It is stainless steel mesh meant for car and motorbike air intake pimping.
MakeCanon
ModelCanon EOS 300D DIGITAL
Exposure0.017 sec (1/60)
Aperturef/5.6
ISO Speed400
Date and Time (Original)2006:01:24 18:47:15
Exposure Bias-1 EV
Metering ModePattern
FlashFlash fired
Focal Length28 mm

Komodo 3 - metalworking

Posted by barnoid Thu, 03 May 2007 23:29:13 GMT

Komodo 3 - metalworking
Part way though literally hacking the computer, with a hacksaw.
MakeCanon
ModelCanon EOS 300D DIGITAL
Exposure0.125 sec (1/8)
Aperturef/4
ISO Speed400
Date and Time (Original)2006:01:22 13:31:39
Exposure Bias0/3 EV
Metering ModePattern
Focal Length30 mm